Jl Subwoofers W3
![]() |
JL Audio CP108LG-W3v3 -
|
![]() |
JL Audio SGR-12 12" Black Mesh Subwoofer Grille fits 12W0, 12W3, and 12W3v2 Equipped with Rubber Gasket / Grille Receiver12" Black Mesh Subwoofer Grille
Designed specifically for the original 12W0, 12W3, 12W3v2, and 12W6 subs
Subwoofer must be equipped with the rubber gasket/grille receiver
Provides the best protection possible for your JL subwoofer
Metal mesh grill painted black
No screws or extra hardware neede... -
|
![]() |
Audio Enhancers 12in Dual KPVR Series Empty Enclosure 2.56 Net CU.FT.Audio Enhancers 12in Dual KPVR Series Empty Enclosure 2.56 Net CU.FT.. -
|
![]() |
JL Audio SGR-8 (P/N #90576/90581, Part: 8W0/W3-Grille) 8" Subwoofer Grille fits 8W0, 8W3, and 8W3v2 equipped with rubber gasket / grille receiver -
|
![]() |
JL Audio 12" Dual 4 Ohm W6V2 Series Subwoofer - 12W6V212-inch subwoofer driver (600W, dual 4 ohm voice coils) 12" subwoofer with dual 4-ohm voice coils polypropylene W-Cone with polyester foam surround solid cast-alloy basket power range: 150-600 watts RMS peak power handling: 1,200 watts frequency response: 20-200 Hz sensitivity: 85.9 dB top-m... -
|
![]() |
10W1V2-4 - JL Audio 10" 4-Ohm Subwoofer10" Single 4 Ohm W1v2 Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Injection-molded, metallic-finish polypropylene cone woofer Rubber surround with stress-relief Customizable trim ring Vented reinforcement collar Elevated frame cooling technology enhances power handling and sound ... -
|
![]() |
JL Audio 8W3V3-4 8" Single 4-Ohm W3V3 Series SubwooferMineral-Filled Polypropylene Upper Cone Body
Removable and Customizable Mounting Flange Trim Ring
Grille Mesh Inserts are Sold Separately
DMA (Dynamic Motor Analysis) Modeling System
Vented Reinforcement Collar
Insert Molded Suspension / Coil / Terminal Sub-Assembly
Elevated Frame-Cooling ... -
|
![]() |
JL Audio 10W3v3-4 10" Single 4 ohm W3v3 Series Subwoofer 10W3v3# 10" 4-ohm subwoofer
# mineral-filled polypropylene cone with nitrile-butylene rubber surround
# power range: 100-500 watts RMS
# peak power handling: 1,000 watts
# frequency response: 25-250 Hz
# sensitivity: 84.87 dB
# top-mount depth: 5-7/8"
# sealed box volume: 0.625 cubic feet
# ported box vol... -
|
![]() |
JL Audio 10W3v3-2 Single 2 ohm 10" W3v3 Subwoofer 10W3v3Features: Power: 500 Watts RMS1000 Watts Peak 2 Ohm Impedance Mineral-filled polypropylene cone woofer Nitrile-butadiene rubber surround DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output Vented reinforcement collar improves rigidity and stabi... -
|
![]() |
JL Audio SGRU-8 Subwoofer GrilleFits 8W1v2, 8W3v3 only -
|
![]() |
JL AUDIO 10W7 - Car subwoofer driver - 10.5" -
|
![]() |
6W3V3-4 - JL Audio 6.5" Single 4-Ohm W3V3 Series Subwoofer (6W3V34)Mineral-Filled Polypropylene Upper Cone Body
Removable and Customizable Mounting Flange Trim Ring
Grille Mesh Inserts are Sold Separately
DMA (Dynamic Motor Analysis) Modeling System
Vented Reinforcement Collar
Insert Molded Suspension / Coil / Terminal Sub-Assembly
Elevated Frame-Cooling ... -
|
![]() |
JL Audio 10w3v3-4 10-Inch 300 Watt Rms SubwooferBRAND NEW TOP OF THE LINE JL AUDIO 10W3V3-4 10" 300 WATT RMS SUBWOOFER
Features:
JL Audio 10W3V3-4 10" 2 Ohm W3 Subwoofer
300 watts RMS (JL Watts)
Impedance: Single 4 ohms
Mineral-filled polypropylene upper cone
Nitrile Butadiene Rubber surrounds
DMA-optimized, long linear excursion capability ... -
|
![]() |
JL AUDIO 8W7 8" 300W 3OHM SUBWOOFER 8W7-3Thermal Power Handling : 300W
Nominal Impedance : 3 ohm
DC Resistance : 2.78 ohm
Linear Excursion (Xmax) : 0.75 in. / 19 mm
Electrical "Q" (Qes) : 0.654
Mechanical "Q" (Qms): 9.50
Total Speaker "Q" (Qts) : 0.612
OverRoll Surround
W Cone : Delivers Cone Stiffness With Minimal Mass
Floating C... -
|
![]() |
JL Audio 12WX-4 WX Series 12 inch 200 Watt 4 Ohm Car SubwooferJL Audio 12WX-4 WX Series 12 inch 200 Watt 4 Ohm Car Subwoofer -
|

















